Safety
Operating Manual PNOZ m C0
1006013-EN-02
| 11
3.2 Applicable documentation
This document includes only part of the information required for the use of the device. To
understand and correctly use the product you must read further documents.
Please read the following documents:
} "PNOZmulti Safety Manual"
} "PNOZmulti Installation Manual"
} The advanced functions of the device are described in the online help for the PNOZmulti
Configurator and in the document "PNOZmulti Special Applications". Only use these func-
tions once you have read and understood the documentation.
3.3 System requirements
Please refer to the "Product Modifications" document in the "Version overview" section for
details of which versions of the PNOZmulti Configurator can be used for this product.
3.4 Safety regulations
3.4.1 Safety assessment
Before using a device, a safety assessment in accordance with the Machinery Directive is
required.
The product as an individual component fulfils the functional safety requirements in accord-
ance with EN ISO 13849 and EN 62061. However, this does not guarantee the functional
safety of the overall plant/machine. To achieve the relevant safety level of the overall plant/
machine’s required safety functions, each safety function needs to be considered separ-
ately.
3.4.2 Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by persons who are competent to do so.
A competent person is a qualified and knowledgeable person who, because of their train-
ing, experience and current professional activity, has the specialist knowledge required. To
be able to inspect, assess and operate devices, systems and machines, the person has to
be informed of the state of the art and the applicable national, European and international
laws, directives and standards.
It is the company’s responsibility only to employ personnel who
} Are familiar with the basic regulations concerning health and safety / accident prevention,
} Have read and understood the information provided in the section entitled Safety
} Have a good knowledge of the generic and specialist standards applicable to the specific
application.
3.4.3 Warranty and liability
All claims to warranty and liability will be rendered invalid if
} The product was used contrary to the purpose for which it is intended,
To Next Page
Loading...
