Pilz PNOZ s30 - Page 80

Display menu - Configuration
Operating Manual PNOZ s30
1001715-EN-19
| 80
Level Menu designation Description Settings
2 Sync. Start
(Rel. 1 ... Out 4)
Default:
deactivated
Set whether outputs are to be star-
ted synchronously.
} deactivated
} activated
1 Outputs Out 4 Ana-
log
Scaling of analogue input
1 Out 4 Analog
f at 20 mA
Default:
1MHz
Enter maximum frequency f
max
for
20mA
Frequency f
max
:
10 mHz … 1 MHz
1 Name of Configura-
tion
Default:
Default
Enter name of the configuration
The name may be a max. of 8
characters in length
It is stored on the chip card
........
1 Password Settings Change passwords
Note: In the "Default Settings"
menu, the passwords are reset to
the default setting: 00000.
2 Master PW Change master password 0000 ... 9999
2 Customer PW Change customer password 0000 ... 9999
2 Language
Default:
English
Select menu language
} English
} German
} French
1 Default Settings Select whether the parameters are
to be reset to the default settings
Yes: All parameters are reset to
the default values. The language
is set to English and all passwords
are set to 0000.
} Escape
} Yes