Pilz PNOZ s9 - Page 22

PNOZ s9
Operating Manual PNOZ s9
21401-EN-10
22
Relay outputs 750109 751109 751189
Utilisation category in ac-
cordance with UL
Voltage
240 V AC G.U. (same po-
larity)
240 V AC G.U. (same po-
larity)
240 V AC G.U. (same po-
larity)
With current 6 A 6 A 6 A
Voltage 24 V DC G. U. 24 V DC G. U. 24 V DC G. U.
With current 6 A 6 A 6 A
External contact fuse pro-
tection, safety contacts
In accordance with the
standard EN 60947-5-1 EN 60947-5-1 EN 60947-5-1
Max. melting integral 260 A²s 260 A²s 260 A²s
Blow-out fuse, quick 10 A 10 A 10 A
Blow-out fuse, slow 6 A 6 A 6 A
Blow-out fuse, gG 10 A 10 A 10 A
Circuit breaker 24V
AC/DC, characteristic
B/C 6 A 6 A 6 A
External contact fuse pro-
tection, auxiliary contacts
Max. melting integral 160 A²s 160 A²s 160 A²s
Blow-out fuse, quick 10 A 10 A 10 A
Blow-out fuse, slow 6 A 6 A 6 A
Blow-out fuse, gG 6 A 6 A 6 A
Circuit breaker 24 V
AC/DC, characteristic
B/C 6 A 6 A 6 A
Conventional thermal cur-
rent
6 A 6 A 6 A
Contact material AgCuNi + 0,2 µm Au AgCuNi + 0,2 µm Au AgCuNi + 0,2 µm Au
Times 750109 751109 751189
Switch-on delay
With manual start typ. 60 ms 60 ms 60 ms
With manual start max. 80 ms 80 ms 80 ms
Delay-on de-energisation
With E-STOP typ. 40 ms 40 ms 40 ms
With E-STOP max. 50 ms 50 ms 50 ms
Recovery time at max.
switching frequency 1/s
After power failure 800 ms 800 ms 800 ms