Pilz PSEN sc ME 5.5 08-17 - Text Messages in the Display

Operation
Operating Manual PSEN sc ME 5.5 08-17
1005388-EN-01
| 102
Create log file
Procedure:
1. Select Device -> Search device.
The network is searched for connected PSEN sc ME 5.5 08-17.
Connected PSEN sc ME 5.5 08-17 are listed under Network environment.
Select the safety laser scanner for which you want to log the events.
2. Select Device -> Read from device -> Open protocol file in PSENscan memory.
The requirement must be confirmed by entering the password. The safety laser scanner
switches to Out of operation. Click OK to continue.
Select the directory in which the file is to be saved.
3. The safety laser scanner display is dark. A red LED is lit.
4. When creating the log file is finished, a message is output. Click OK to continue.
The safety laser scanner switches to In operation.
5. You can now open the log file.
In Windows explorer, switch to the directory you selected when saving the log file and
open the log file on a text editor.
10.4 Text messages in the display
With the buttons under the display of PSEN sc ME 5.5 08-17 you can navigate in the mes-
sage in the display.
Confirm message in the display and open the next menu level or exit the last
menu level
Scroll down
Scroll up
The LC display shows information and navigates the menu with the sections Information,
Setting and Exit.
Information
Menu item Menu second
level
Meaning
Hardware Device-specific displays
Device name The name of PSEN sc ME 5.5 08-17 is displayed.
Product name The product type of PSEN sc ME 5.5 08-17 is dis-
played.
Order number The order number of PSEN sc ME 5.5 08-17 is dis-
played.
Serial number The serial number of PSEN sc ME 5.5 08-17 is dis-
played.
Firmware version The firmware version of PSEN sc ME 5.5 08-17 is
displayed.