Pilz PSEN sc ME 5.5 08-17 - Page 18

Function description
Operating Manual PSEN sc ME 5.5 08-17
1005388-EN-01
| 18
[1]
[3]
[2]
Legend
[1] Danger zone
[2] Configured zone 1, monitoring not activated
[3] Configured zone 2, monitoring not activated
If a violation of the protective zone is detected, the evaluation device switches off the out-
puts configured for this. The machine is brought to a safe condition via the connected
OSSDs.
If a violation of the warning zone is detected, the actions configured in PSENscanConfigur-
ator are performed. A visual or audible signal can be activated as advance warning.
When using 2 warning zones, different reactions can be configured.