Pilz PSEN sc ME 5.5 08-17 - Configuration of Zones

First commissioning
Operating Manual PSEN sc ME 5.5 08-17
1005388-EN-01
| 78
2
13
11
0 V24 V
0 V
OSSD 1
OSSD 2
24 V
0 V
1
24 V
F.E.
16
PSENscan
24 V
0 V
10
24 V
0 V
8
3
12
4, 5, 6, 7, 9, 14,
15, 17
0 V
24 V
24 V
0 V
Evaluation device
Input circuit
External
supply voltage
Configurable
via GUI
Fig.: Dual-channel connection of the safety laser scanner with 17-pin male connector on the input cir-
cuit of an evaluation device (1 zone set, warning message, automatic restart)
Suitable Pilz evaluation devices are, for example:
} PNOZmulti for monitoring safety laser scanners
Configure the safety laser scanner in PNOZmulti Configurator as a function element
"Light curtain" with switch type3.
} Automation system PSS 4000
The correct connection to the respective evaluation device is described in the operating
manual for the evaluation device. Connect the evaluation device according to the specifica-
tions in the selected evaluation device’s operating manual.
9.3 Configuration of zones
Please note:
When these inputs/outputs are used, a pin has to be assigned for each used input or out-
put.
} Outputs
– Warning
– Alarm 1
– Alarm 2
– Override status
– Muting lamp