Pilz PSEN sc ME 5.5 08-17 - Page 99

Operation
Operating Manual PSEN sc ME 5.5 08-17
1005388-EN-01
| 99
Message in the display Error/cause Description/measure
Icon Text
INTF8 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF9 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF10 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF11 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF12 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF13 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF14 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF15 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF16 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.
INTF17 An error occurred during the system
test.
Perform a reset of the safety laser
scanner [ 104].
If the error persists, please contact
Pilz.