HUNTER-PRO 32 User Manual LED Keypads
16
NOTE:
With RXN-9, when selecting users 1 through 8, the corresponding number (key) will
blink. With RXN-416, when selecting users 1 through 8 and 10 through 16 the
corresponding zone LED will blink.
Setting Time and Date
Time and date should be accurate because they are used in the system's
memory log, Automatic Arming, and reporting to monitoring station.
To set time and date:
Master Code
(LED 8 constantly ON, LED 1 blinks)
TIME (HH:MM)
(LED 8 constantly ON, LED 2 blinks)
DATE (DD/MM/YY)
NOTE:
Enter time in 24:00 (HH:MM) format and date in day/month/year format
The system will not accept meaningless data, such as 25:25 time.
Example:
To program 6:35 PM @ October 21
st
, 2005 do:
Master Code
(LED 8 constantly ON, LED 1 blinks)
(LED 8 constantly ON, LED 2 blinks)
Automatic Arming
The system can be automatically armed with one of the following three
options: 1. At a preset time; 2. After silence-time period; 3. Silence time can be
programmed per partition (by technician)
At the preset time or after silence-time period, the system will commence auto-
arming unless it was armed before that time. This feature is valid for all
weekdays.
To Next Page
Loading...
