HUNTER-PRO 32 User Manual LED Keypads
5
RXN-9
The RXN-9 keypad has 9 red LEDs under the 9 keys (1-9). The LEDs give two
types of indications: zone status and faults (as described below). A red Fault
LED, a green Armed LED and a red Bypass LED.
Armed Indicator:
The green ARMED LED
provides the system arm status
as follows:
OFF: System/partition is
Disarmed.
ON: System is in Arm mode.
Blinking: System/partition is
in Entry or Exit Delay Mode.
BACK
END
ENTER
NEXT
INFO
Lid
Fault Notification:
The red FAULT LED
blinks when a fault is
detected.
Zone Status:
The status of each
zone is listed by its
number.
Faults:
Long press on the
[INFO] key changes
LED display to system
faults (see Faults
Table for details).
Bypass:
The red BYPASS LED is
ON when one (or more)
zones is bypassed.
Please note the different operation keys in both keypads:
RXN-9 RXN-416
To Next Page
Loading...
