Pima Hunter-Pro 32 - Siren Without Built-In Oscillator: Horn (AC); Stand-Alone Siren: Piazzo (DC)

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
34
IMPORTANT!
Different siren types cannot be connected simultaneously.
3.6.1 Siren without built-in oscillator: Horn (AC)
A Siren without a built-in oscillator (AC). Consumes up to 200 mA.
The siren is connected between terminal block outputs (S1, S2) and GND (-).
The siren’s sounds are produced by HUNTER-PRO 32 inner built-in oscillator.
When the zones’ features are configured (see section 5.3.1), it is possible to
program different siren sound to different zones.
Make sure that in “General Parameters” screen (section 5.6) the siren is not
configured as DC (mark a “-“ under the “D” letter parameter).
Also make sure that JP5 shorts legs 2 and 3 (see drawing 6).
SIREN KEYBOARD
Z8
-
+
KEY
-
S1 S2 C N.O N.C
-
RELAY SMOKE
-
+INOUT
F4
SIREN 1
SIREN 2
GND
JP5
F3F2
Drawing 9 Connecting AC Siren
3.6.2 Stand-Alone Siren: Piazzo (DC)
A Siren with a built-in oscillator (DC). Consumes up to 200 mA.
The siren is connected between terminal block outputs (S1, S2) and Auxiliary
Power (+).