Pima Hunter-Pro 32 - Local Programming with COMAX & LCL-11 A

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
48
-V
+V
IN
OUT
TMPR
2
TMPR
1
ON/
OF F
ALARM
KEYBOARD
JP5
KEY
- S1S2CN.ON.C
-
SIREN RELAY SM OKE
-+IN
OUT
F4F3
PRG-22
1 JAN 04 12:53
OP: TOMAS OFFICE
Drawing 19-Connecting LCD Keypad to Control Panel and PRG-22
4.2.2 Local Programming with COMAX & LCL-11A
In order to commence local programming with the COMAX software, you need
to use the LCL-11A adaptor. The LCL-11A is an interface between the HUNTER-
PRO 32 system and a PC with the COMAX Upload/Download Software. The
LCL-11A provides fast, easy, and convenient programming. You can program
the parameters in advance and “upload” them after you complete the
installation.
The LCL-11A connects to the PCB inside the customer’s keypad (on the PCB’s
upper left side).
Refer to section. 5.9.3 for fast programming procedures.