HUNTER-PRO 32 Intruder Alarm System - Installation Manual
50
Technician Menu
: The technician’s programming screens are organized in
menus
4.3 Programming with a Keypad
4.3.1 PIMA Programming Method
SRK12123HTBL
+---_++++---
Drawing 21- Example
for a Zone Status Bar
All programmable parameters in HUNTER-PRO 32 are
divided according to subjects presented in menus.
Additionally, the Zone Status Bar greatly facilitates
field programming in cases of “YES/NO” options by
presenting all these options in a single screen.
When the blinking sign
_
reaches one of the parameter letters, the display
changes for 3 seconds and shows the this function’s full name and a brief
description.
4.3.1.1 Manu Navigation
Navigation is possible through the menus and parameters by using the
following keys:
EXIT/DELETE key. Pressing this key deletes changes enacted on
parameters or exits a current menu.
BACKWARDS/FORWARDS keys navigating between a Menu’s options
or parameters presented in the same screen,
and between the options in the YES/NO programming screens (i.e.
Zone Status Bar, section 4.3.1).
SELECTION/CONFORMATION key. Pressing this key selects the
desired menu or option presented on screen. After changing
parameters, pressing this key confirms and saves the changes in the
system’s Memory.
RESET key. Pressing this key resets parameters in screens where
numbers are programmed (i.e. telephone numbers, Account
Numbers to Monitoring Station, etc.)
4.3.2.3 Key Menu Description
To Next Page
Loading...
