HUNTER-PRO 32 Intruder Alarm System - Installation Manual
57
For example: if keypad 2 is designated to work with partition 2, a “+” is to be
marked above 2 in the LCD screen.
NOTE:
Keypad partitions are only activated in case of a partitioned system.
5.3 Zone Programming
Zones
ENTER/NEXT/END
ENTR
2
9
In this menu all the system’s zones are programmed (wired, wireless, original
and expanded). In this menu the following functions are programmed:
5.3.1 Zone Characteristics
2
ENTR
Zone Configur.
ENTER/NEXT/END
ENTR
Zones
ENTER/NEXT/END
ENTR
Alarm
ZONE 1 1
BOFHHIDTEPDE
---++_-++---
After the bar is programmed press and move to the next zone
ENTR
9
In this screen the zone’s characteristics are programmed (i.e. Alarm, Panic,
Smoke). The characteristics can be changed according to “Zone Responses”
(refer to section 5.3.4).
It is also possible to program the zones with different Alarm, Panic or Smoke
characteristics. In addition to the three basic characteristics there is: Special
Alarm 1, Special Alarm 2, Special Alarm 3, Special Panic and Special Smoke
Only after setting the zones’ shared characteristics the changes concerning
specific zones can be programmed. Each of the following characteristics can be
programmed for each of the zones:
To Next Page
Loading...
