Pima Hunter-Pro 32 - General Parameters; General Parameters First Screen

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
72
5.6 General Parameters
ENTR
5
Gen. Parameters
ENTER/NEXT/END
9
In the following group of screens there are different system parameters. Each
screen contains up to 16 parameters set together on a bar and presented in
two rows: the upper line has the letter parameters, the bottom line presents
the “+” (enabled) and “-“ (disabled) signs.
Use
and keys to navigate forward and backwards on bar
Use
key to change a certain parameter’s sign
Use
key to confirm
Use
key to exit without save.
NOTE:
Each time the cursor in the screen stands on a certain parameter,
automatically a description of this parameter appears for 3 seconds.
5.6.1 General Parameters First Screen
KE1E2EKAB2SMPZT
_++---+-++--+--
NEXT BACK ENTR
NOTE:
 To navigate on bar, use and keys.
 Marking a “+” under a parameter’s letter enables this parameter. Marking a
“-” denies this possibility.
 In order to change the mark from “-“ to “+” (and vise versa) use