Pima Hunter-Pro 32 - Initializing System; Local Download; Fast Programming

HUNTER-PRO 32 Intruder Alarm System - Installation Manual
77
5.9.1 Initializing System
8
ENTR ENTR
Full Programming
ENTER/NEXT/END
System Defaults
ENTER/NEXT/END
9
and then to confirm:
Are You Sure?
ENTER/NEXT/END
Press to confirm.
When system initialization is executed, all system parameters reset to defaults:
Defaulting
Please Wait...
at the end of initialization
Syst. Defaulted
Press END
5.9.2 Local Download
8
ENTR
ENTR
NEXT
Full Programming
ENTER/NEXT/END
Local Download
ENTER/NEXT/END
Local Upload
Programming
ENTR
9
Using this feature, HUNTER-PRO 32 is connected directly to a local computer
running COMAX and connected to the system using LCL-11A adaptor that is
connected to the keypad (see section 4.2.2 for connecting programming
keypad with LCL11A).
Pressing
when display shows Charge activates the local charge, shift
control to COMAX and show the message:
OTHER KEYPAD IN USE .
5.9.3 Fast Programming
8
ENTR
ENTR
NEXT
Full Programming
ENTER/NEXT/END
Fast Load
ENTER/NEXT/END
X2
Fast Loading
.....
Please Wait…
Display returns to regular status dispaly
9