40 HUNTER-PRO Series Installation Guide
3.17.1 Setting Time & Date
USER MENU
Choose 1,2...
8
Master/User
Code
9
1. Enter the time (HH:MM format) and
2. Enter Date and then
Press
and to move the cursor to the left and right
The user code must be enabled by the installer to set the time
Another way to access the user menu:
Installer Code
3.18 Wireless Faults Display
3.18.1 In PIMA Fast Display
Wireless accessories faults:
Zone Indi. Fault
7 F Wireless zone (Detector’s tamper is open)
14 V Supervision
17 L Low battery
L---------------
------F------V--
1 2 3 4 5 6 7 8 9
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
10 11 12 13 14 15 16
For example: zone #7 (tamper) is open, no
supervision signal is received from zone
(detector) #14, low battery in zone #17.
When the display is set to “Fast Display” and a battery, tamper or
supervision fault occurs, the display is automatically set to “Open
Zones Scan”. When all the faults are resolved the fast display
returns
3.18.2 In Scan Open Zones Display
The following are example wireless receiver faults:
Display Fault
2 JUL 07 13 :10
Wirele ss Un it
Communication fault with the I/O-WN receiver
1 JUL 07 03 :00
W/L Un it Ta mper
I/O-WN’s tamper is opened
To Next Page
Loading...
