48 HUNTER-PRO Series Installation Guide
5.3 Key #1: System Installation
5.3.1 Service Provider and End of Service Date
ENT R
1
Service Pr ovider
ENTER/NEXT /END
9
Sys Installa tion
ENTER/NEXT/E ND
ENTR
Serv ice Provider
PIMA El. Systems
Enter the system’s service provider’s details, such as name and telephone number.
To show this screen at any time, press [NEXT] for 2 seconds when the system is not
armed.
Press [ENTR] and enter the date in which the service ends. In that date, the following
2 messages appear onscreen
*
intermittently:
1 4 M AR 0 8 12 :0 0
C all S er vic e
14 MA R 08 1 2: 00
Se rvi ce P rov id er
..
. The messages cease to appear the next
time the system is armed or when technician code is entered.
5.3.2 Expanders
ENTR
1
Expanders
ENTER/NEXT/END
ENTRNE XT
Sys Installation
EN TER/N EXT /E N D
XMW
---
ENTR
Remote Expanders
0
5.3.2.1 Local
Par. Name Marking “+” means
X Local Expander Local expander EXP-PRO UNIV with 8 additional zones is
installed
M Zone Doubling This feature is enabled
W Wireless Expander I/O-WN wireless receiver is installed
5.3.2.2 Remote Expanders
Set the number of the installed remote expanders (with no EXP-PRO UNIV installed).
The no. of remote expanders varies according to the system:
In Hunter-Pro 832: 3 max.
In Hunter-Pro 896: 11 max.
In Hunter-Pro 8144: 16 max.
Entering a number exceeding the max. will result in an error
*
This message appears only if the service provider and the end of service date
were set
To Next Page
Loading...
