HUNTER-PRO Series Installation Guide 51
Par. Full Name Enabling (marking “+”) this parameter means
B Bypassed
Permanently
The zone is permanently bypassed
0 Normally Open The zone is set as N.O. zone
F 24 Hour Zone The zone is armed around the clock, regardless of the
system arming state
H Active in ‘Home 1’ The zone is armed in ‘Home 1’ mode
H Active in ‘Home 2’ The zone is armed in ‘Home 2’ mode
I Entry Delay Exit/Entry delayed zone
D Zone Follower This zone will not trigger the alarm if opened during the
Entry/Exit delay
T Second Delay
Time
Setting the Exit/Entry delay time to the second period
(refer to section 5.6)
E EOL Resistors The zone is protected by EOL circuit
P Conditioned Zone The zone triggers the alarm only if other conditioned zone
is violated within the “Cond. Zone Time” (refer to
section 5.6.1)
D Double Knock The zone triggers the alarm only if 2 pulses occur within a
preset period of time (refer to section 5.6.7)
E User Bypass Users can set the zone to be bypassed (temporarily)
S Not in use -
S Not in use -
5.4.2 Zone Responses
2 EN T R EN TRNE X T
Zones
ENTER/NEXT/END
Zo ne Response
EN TER/NEXT/END
Burglary
ENTER/NEXT/END
ENTR
SS LTBM
++ ----
The 6 parameters defining the zone responses are:
Par. Description Enabling (marking “+”) this parameter means…
S Activate Siren Alarms from this zone will trigger the sirens
S Ext. SRN in OFF Alarms from this zone will trigger the external siren even
when the system is disarmed (OFF)
L No Daytime MS No report is sent to the MS when the system is disarmed
T Dif. Siren Tone Different siren tone (not applicable using a DC siren)
B Automatic Bypass False alarm prevention feature: The zone will automatically
become bypassed if 3 alarms occur in it consecutively
M Activate Audio Alarms from this zone will activate the audio device
*
(VU-20N or MIC-200)
*
Together with enabling “V” in Communication menu (section 5.5.4), for VU-20N only
To Next Page
Loading...
