HUNTER-PRO Series Installation Guide 53
5.4.6 Partition Name
2 ENTR ENTRNE XT
x4
Zones
ENTER/NEXT/END
Partition Name
ENTER/NEXT/END
Partition1 Name
Partition 1
The partition’s name will appear on every of its allocated keypad. To enable the
displaying of partitions:
5 ENT R
Display Type:
Show Part Name
BACK
Enter
Ma ste r
Co de
Partition names can only be displayed in partitioned keypads
5.4.7 Copy a Zone
2
EN T R ENTRBACK
Zones
ENTER/NEXT/END
Copy Zone
ENTER/NEXT/END
Source Zone: 7
Target: 9 To 32
Exam ple
TCP
+++
ENTR
Copy zone characteristics into other zones is a very useful installation feature, in which
some or all characteristics of one zone can be copied to other zone/s. Once
programming of a single “source” zone is done, copying it onto as many as all other
zones is easy and quickly: Choose one or more ‘target’ zones, define what to copy (see
the next sub-section) and press [ENTR].
5.4.7.1 Copying Options
Par. Marking “+” means…
T Copy the zone type
C Copy the zone characteristics
P Copy the zone allocated partitions
When copying is done the next message is displayed:
Finish Coping!
Press END
To Next Page
Loading...
