60 HUNTER-PRO Series Installation Guide
5.5.6.2 GSM Modes
3 ENTR ENTRNEXT
X6
Communication
ENTER/NEXT/END
GSM Transmitter
ENTER/NEXT/END
GSM Settings
ENTER/NEXT/END
NEXT
GSM Modes
ENTER/NEXT/END
ENTR
GSM-200 Mode 1
Voice Channel
NE X T
GSM-200 Mode 1
Data Channel
NEXT
GSM-200 Mode 1
GPRS Channel
NE X T
GSM-200 Mode 1
SMS Channel
Set the GSM-200 one of two operation modes: Mode 1 for MS1 and mode 2 for MS2
(double report). Each mode can be set to one of four channels: Voice, Data, GPRS or
SMS
*
. In each screen, press [ENTR] to choose Mode 2.
The Data channel can be used by COMAX. To do so, the GSM-200 SIM card must carry
2 separate phone numbers.
If both MSs use GPRS (Mode 1 & Mode 2), the second mode will be used to report
to MS2.
5.5.6.3 GSM Phones
NEXT
G SM P hones
E NTER/NEXT/END
ENTR
MS Phone 1<De l=#
X23 ENTR ENT RNEXT
X6
Set MS1 GSM phone numbers 1 to 4.
5.5.6.4 GPRS Settings
GSM Settings
ENTER/NEXT/END
NEXT
GPRS Settings
ENTER/NEXT/END
ENTR
Station 1 IP
0. 0. 0. 0.
X3
ENTR
Station Port
10001 10001
ENTR
Tst intrvl(GPRS)
Min:5 Secnd:0
3
ENTR ENTRNE X T
X6
Station 2 IP
0. 0. 0. 0 .
ENTR
Set the GPRS parameters for the MSs. These include the IP no., port no. and test interval.
To see the GSM-200 version (and the SMS-100, if installed), in the
main screen, press [ENTR] until it is displayed. The display will
show both the transmitter and the system version.
*
GSM-200 and SMS-100 cannot be installed in the same system
To Next Page
Loading...
