64 HUNTER-PRO Series Installation Guide
5.5.12.2 PSTN SMS Phones
3 ENTR ENTRB ACK
Communication
ENTER/NEXT/END
NE X T
PSTN SMS Phone
ENTER/NEXT/END
X2
ENTR
SMS Center OUT
EN T R
SMS Center IN
Set the details for the SMS-100 PSTN module.
OUT is the PSTN SMS center phone no.
IN is currently not in use
5.5.12.3 Network Settings
3 ENTR ENTRBA CK
Communication
ENTER/NEXT/END
BACK
Network Set ti ng s
ENTER/NEXT/END
EN TR
9
MS1 URL/IP
EN TR
ENTR
MS2 URL/IP
EN TR
MS1Port MS2Port
10001 10001
ENTR
ENTR
UploadPort:10001
Web Port: 10001
ENT R
STATIC IP
0 .0 .0 .0
ENTR
SUBNET MASK:
0 .0 .0 .0
ENTR
DEFAULT G AT EW AY :
0 .0 .0 .0
ENT R
DNS SERVER
0 .0 .0 . 0
ENT R
Test interval
Min:1 Secnd:0
ENTR
AttemptsTo Fail
10
ENTR
Enter the IP network parameters. As in any IP network, the IP no. can either be static,
or dynamic, using a DHCP (Dynamic Host Configuration Protocol) server.
If you use net4pro-i (P/N 6247001), the URL/IP screen must
be left blank
To use static IP fill in the parameters in the next screens. If you use a DHCP server the
system will ignore the Static IP screen and the 3 following screens.
The URL/IP and Station Port screens are mandatory, both when using static or dynamic
IP. See the next table for further details.
To Next Page
Loading...
