HUNTER-PRO Series Installation Guide 67
Following is a table of the output types (see section 1.7) with their default timing.
[NEXT] Output type Timing (Sec.)
- Ext. Siren 240
X1 Int. Siren 240
X2 Burglary 240
X3 Anti-mask 240
X4 Special Burglary 1 240
X5 Special Burglary 2 240
X6 Smoke 240
X7 Fire 240
X8 Special Fire 240
X9 Panic 240
X10 Silent Panic 240
X11 Hold Up 240
X12 Medical 240
X13 Tamper 240
X14 Mains Fault 9999
X15 Low Battery 9999
X16 Phone Failure 9999
X17 Trouble 9999
X18 Zone Bypassed 9999
X19 GSM Fault 9999
X20 Comm. Fault 9999
X21 TAG Activation 240
X22 Door code 5
X23 W/L Remote 5
X24 Test 5
X25 Audio Device 60
X26 Remote control* 60
X27 Zone Open Hold** 0 (min.)
* The time an output remotely triggered remains triggered
** Energy saving feature: Can be used for automatically turn off air conditions and
lights at the end of the day.
“Zone open hold” works in conjunction with the ‘Zone Opened’ output type (an
event output type that follows the zones status): After setting the “Zone open hold”
time, any PCB output that is triggered by ‘Zone Opened’ output type (i.e. triggered
when any zone is violated) will remain triggered after the zone returns to normal
mode, for the time set in the “Zone open hold” time (unless the zone is violated
again first).
To Next Page
Loading...
