©
2024 Pimax All Rights Reserved
8
3.6. New Controller Pairing (Each Controller Need
to be Paired Separately)
Step 1: Charge the controllers for at least 15 minutes before pairing to
ensure they have sucient power.
The indicator light ashes red while charging. If it doesn't ash, re-plug the
charging cable or press the π button.
Step 2: Cancel the current pairing by pressing the menu button and
π button simultaneously until the blue light turns on.
The controllers are paired by default when they leave the factory.
Step 3: In Pimax Play, click SET PAIR. Then, press and hold Menu+B
(for the right controller) or Menu+Y (for the left controller)
until the indicator light on the controller starts ashing blue.
Step 4: Follow the on-screen prompts and click PAIR in Pimax Play.
Remember to pair each controller individually
Ensure that the headset is not in sleep mode during the pairing process.
Step
5
:
W
ait for the controller's indicator light to turn green.
O
nce
it does, Pimax Play will con
rm that the controllers have been
paired, and the
U
I should display the controller graphic
illuminated in green.
To Next Page
Loading...
