©
2024 Pimax All Rights Reserved
11
3.8. Firmware Update Instructions
Open the Pimax Play software on your PC.
Navigate to "Device Settings -> Check for Updates."
The system will automatically check the current software and
rmware version.
If a newer version is available on the server, it will prompt you
to perform an update.
CAUTION READ CAREFULLY
Ensure that the headset is paired with the controllers before updating the device rmware
to perform the OTA (over-the-air) updates
Before updating the rmware, verify that both the headset and controllers have sucient
power. Only proceed with the update if both have more than three battery lights
Do not unplug the USB cable or turn off the computer during the rmware update process.
To Next Page
