Need help?Do you have a question about the PIONEER DJ DDJ-SX3 and is the answer not in the manual?
General| Type | Controller |
|---|---|
| Channels | 4 |
| Decks | 4 |
| Jog Wheel | Yes |
| Sound Card | Yes |
| Frequency Range | 20 Hz - 20 kHz |
| Weight | 3.6 kg |
| Software | Serato DJ Pro |
| MIDI | Yes |
| Jog Wheels | 2 |
| USB | USB 2.0 |
| Pads | 16 |
| Compatibility | Windows, Mac |
| Inputs | 2 x RCA, 2 x XLR, 1 x 1/4" TRS |
| USB Ports | 1 x USB 2.0 |
Overview of the unit's design and capabilities.
Lists all items included with the product.
Instructions for obtaining digital manuals.
Steps for downloading and installing necessary software.
Explains controls for navigating music libraries.
Details controls for individual decks.
Describes the audio mixing controls.
Explains controls for applying audio effects.
Details all rear panel connections and ports.
Details all front panel connections and controls.
Explains the jog wheel's visual indicators.
Guide to connecting external hardware.
Instructions for powering the unit.
Instructions for starting the DJ software.
Steps for loading and playing tracks.
Guide to monitoring audio via headphones.
Steps to safely shut down the unit and software.
Diagrams for connecting input and output sources.
Instructions for using the power cord hook.
Explains functions activated by performance pads.
How to set and use hot cue points.
How to use the roll playback function.
How to use the slicer function for beat division.
How to load and play samples.
How to set and play cue loops.
How to save and recall loops.
How to use pitch play for pitch-shifted cues.
Introduction to the Serato Flip feature.
Covers saving, calling, and quitting flips.
How to use the edit grid function.
Covers various slip mode uses like hot cue, scratch, loop.
How to use DUAL DECK, fader start, and crossfader start.
How to use velocity sampler and analyze tracks.
Introduction to applying audio effects.
How to operate effects in multi and single modes.
How to connect and mix external sources and microphones.
Details Sound Color FX and tempo mode switching.
Steps for mixing external audio sources.
Introduction to the settings utility.
How to adjust audio buffer and microphone parameters.
How to check driver version and access utility modes.
How to configure fader start functions.
Covers master level, slip flashing, and demo mode adjustments.
Adjustments for sampler, crossfader, and jog wheel illumination.
Settings for backspin, jog sensitivity, and MIDI.
How to enable automatic launch of the utility software.
Audio block diagram and using unit with other software.
Details on driver software and MIDI messages.
Info on driver updates and software license terms.
List of product and company trademarks.
Information regarding copyright and product specifications.
To Next Page
