System Firmware Update Instructions for
AVH-Z5200DAB
AVH-Z5200BT
AVH-Z3200DAB
AVH-Z2200BT
REMARKS:
If you have any difficulty carrying out these instructions, please contact Pioneer Customer
Support. Once upgraded to this version, it is not possible to downgrade to a lower version.
This firmware is NOT intended for US version products.
Please download and print these instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order
described below.
DO NOT turn your unit off or disconnect the USB storage device while the firmware is
being updated.
You can only update the firmware when the vehicle is stopped and the parking brake is
engaged.
In order to perform this update, the following items are needed:
Pioneer In-Dash AV Receiver listed above
A USB storage device meeting the following requirements:
- 2 GB or larger in capacity, formatted to FAT32
- Blank (should not contain any files)
A. Displaying the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number
of the firmware.
1. Press the HOME button to display the Top menu screen.
2. Touch the following keys in the following order.
The “System” screen appears
To Next Page
Need help?
General
