• DO NOT perform this firmware update if the model number of your Pioneer product is anything other
than one of the above models.
• Ensure that the update file is located within the root (top) folder of your SD memory card or USB
storage device. There should be no other files within the SD memory card or USB storage device.
• While your unit is being updated, DO NOT turn off the system’s power and DO NOT touch the unit’s
touchscreen as this may result in severe damage to your unit.
• DO NOT remove the SD memory card or USB storage device during the firmware update process.
• Performing the firmware update will restore all settings to their default values.
• Disconnect any external mobile devices that are currently connected to your unit.
Part 1: Updating the firmware on your Unit
Procedure:
1. Connect a blank (formatted) SD memory card or USB storage device to your computer, and then locate
the correct update file and copy it onto the SD memory card or USB storage device.
2. Insert an SD memory card into the SD card slot or connect the USB storage device to the USB port.
3. Turn the source off on your unit.
4. Press the HOME button to display the Top menu screen.
5. Touch the following keys in the following order.
The “System” screen appears.
6. Scroll down the list.
7. Touch [System Information].
To Next Page
Loading...
Need help?
General
