ISUKAI 41
ITC 42
ITT 31, 32, 42
JEC 05
JVC 13, 23
KAISUI 18, 41, 44
KAPSCH 31
KENDO 42
KENNEDY 32, 42
KORPEL 07
KOYODA 44
LEYCO 07, 40, 46, 48
LIESENK&TTER 07
LOEWE 07
LUXOR 32, 42, 43
M-ELECTRONIC 31, 44, 45, 54,
56, 07, 36, 51
MAGNADYNE 32, 49
MAGNAFON 49
MAGNAVOX 07, 10, 03, 12, 29
MANESTH 39, 46
MARANTZ 07
SIEMENS 31
SINUDYNE 32, 39, 40, 49
SKANTIC 43
SOLAVOX 31
SONOKO 07, 44
SONOLOR 31, 35
SONTEC 07
SONY 04
SOUNDWAVE 07
STANDARD 41, 44
STERN 31
SUSUMU 41
SYSLINE 07
TANDY 31, 41, 48
TASHIKO 34
TATUNG 07, 48
TEC 42
TELEAVIA 36
TELEFUNKEN 36, 37, 52
TELETECH 44
TENSAI 40, 41
THOMSON 36, 51, 52, 63
THORN 31, 07, 42, 45, 48
TOMASHI 18
TOSHIBA 05, 02, 26, 21, 53
TOWADA 42
ULTRAVOX 32, 42, 49
UNIDEN 92
UNIVERSUM 31, 07, 38, 42, 45,
46, 54
VESTEL 07
VICTOR 13
VOXSON 31
W
ALTHAM 43
WATSON 07
WATT RADIO 32, 42, 49
WHITE WESTINGHOUSE 07
YOKO 07, 42, 46
ZENITH 03, 20
Before Starting Playback
Turning Off the Front Panel Display
and Indications
If you feel that the indicators on the Player are too bright
when watching movies, you can turn them off except for the
FL OFF indicator.
Operate using the remote control
unit
Press FRONT LIGHT.
The front panel display and indicators turn on and off each
time this is pressed. When off, only the FL OFF indicator is lit.
HOME MENU operation
Press 1 HOME MENU to display the HOME
MENU screen.
Press
2 to select “Settings”, then press
ENTER.
Press
3 to select “Smart Settings”, then
press ENTER.
Audio Video Settings
Smart Settings
Control
Playback Setting
Communication Setup
Version
On Screen Language
USB Memory Management
Software Update
System
Press 4 to select “Front Panel Display/LED”,
then press ENTER.
Press
5 to select “On” or “Off”, then press
ENTER.
Press
6 HOME MENU or EXIT to exit.
About Control Function with HDMI
The functions work when a control function with HDMI-
compatible Pioneer Flat Screen TV, AV system (AV receiver or
amplifier, etc.) or HD AV Converter is connected to the player
using an HDMI cable.
Also refer to the operating instructions of the Flat Screen
TV, AV system (AV receiver or amplifier, etc.) and HD AV
Converter.
To use the control function with
HDMI
The control function with HDMI operates when control •
function with HDMI is set to On for all devices connected
with HDMI cables.
Once connections and the settings of all the devices are •
finished, be sure to check that the player’s picture is output
to the Flat Screen TV. (Also check after changing the
connected devices and reconnecting HDMI cables.) The
control function with HDMI may not operate properly if the
player’s picture is not properly output to the Flat Screen TV.
Use High Speed HDMI•
®
Cables when using the control
function with HDMI. The control function with HDMI may
not operate properly if other HDMI cables are used.
For some models, the control function with HDMI may be •
referred to as “KURO LINK” or “HDMI Control”.
The control function with HDMI does not work with devices •
of other brands, even if connected with an HDMI cable.
What the control function with HDMI
can do
Outputting the optimum picture quality to a Flat •
Screen TV compatible with the control function with
HDMI.
When the control function with HDMI is enabled, video
signals with the optimum picture quality for control function
with HDMI are output from the player’s HDMI terminal.
Operating the player with the Flat Screen TV’s remote •
control.
Such player operations as starting and stopping playback
and displaying the menus can be performed from the Flat
Screen TV.
The player’s playback picture is displayed on the Flat •
Screen TV’s screen. (Auto-select function)
The input switches automatically on the Flat Screen TV, AV
system (AV receiver or amplifier, etc.) and HD AV Converter
when playback is started on the player or the HOME
MENU or Disc Navigator is displayed. When the input is
switched, the playback picture, the HOME MENU or Disc
Navigator appears on the Flat Screen TV.
The power of the Flat Screen TV and the player turns •
on and off automatically.
(Simultaneous power function)
When playback on the player is started or the HOME
MENU or Disc Navigator is displayed, if the Flat Screen
TV’s power was off, its power turns on automatically.
When the Flat Screen TV’s power is turned off, the player’s
power automatically turns off. (The power does not turn off
automatically if a disc or file is playing on the player or the
player’s operation screen is displayed on the Flat Screen TV.)
The player’s on-screen display language switches •
automatically. (Unified language function)
When the language information from a connected Flat
Screen TV is received, you can have the player’s on-screen
display language change automatically to that of the Flat
Screen TV. This function is available only when playback is
stopped and the menu screen is not displayed.
About the PQLS function
PQLS (Precision Quartz Lock System) is a digital audio
transfer control technology using the HDMI control function.
The player’s output signals are controlled from the AV
amplifier to achieve high sound quality playback using the
amplifier’s quartz oscillator. This eliminates the influence of
the jitter generated during signal transfer which can adversely
affect the sound quality.
This player supports the functions below.•
The “PQLS 2ch Audio” function that is only activated −
when playing music CDs (CD-DAs)
The “PQLS Multi Surround” function that is activated −
when playing all discs (BDs, DVDs, etc.) with linear PCM
audio output
The “PQLS Bitstream” function that is activated when −
playing with bitstream audio output
The various PQLS functions are activated when a Pioneer •
AV amplifier supporting the PQLS functions is connected
directly to the HDMI OUT terminal with an HDMI cable and
the main unit settings are set as shown below (page 21).
Control function with HDMI: On
HDMI audio output: PCM (PQLS multi-surround only)
Also refer to the AV amplifier’s operating instructions.•
See the Pioneer website for AV amplifiers supporting the •
PQLS function.
CAUTION
The PQLS function may stop working when the video •
output resolution is switched. The PQLS function will start
working again once playback is stopped then restarted.
When the PQLS 2ch function is activated, the output from •
the player’s VIDEO OUTPUT jacks may not have the proper
colors. If this happens, connect the TV and AV amplifier’s
HDMI terminals or the TV and player’s COMPONENT
VIDEO OUTPUT jacks to view the picture.
Turn on the power of the AV amplifier connected to the •
HDMI OUT terminal, then start playback of the disc.
NOTE
The PQLS indicator on the player’s front panel lights when •
the PQLS function is activated (page 7).
13
Playback
To Next Page
Loading...
