5En
Do not use the unit in standard mode when a speaker system for network mode is connected to the
unit. Do not use the unit in network mode when a speaker system for standard mode is connected to
the unit. This may cause damage to the speakers.
1 Turn the M.C. dial to select the options, then press to confirm.
To proceed to the next menu option, you need to
confirm your selection.
2 [QUIT :YES] appears when all the settings have been made.
To return to the first item of the setup menu, turn the M.C. di
al to select [QUIT :NO],
then press to confirm.
3 Press the M.C. dial to confirm the settings.
Menu Item Description
LANGUAGE Select the language to display the text information from a
compre
ssed audio file.
[ENG](English),
[РУС
](Russian),
[TU
R](Turkish)
CLOCK SET Set the clock.
1 Turn the M.C. dial t
o adjust the hour, then press to confirm.
The indicator moves to the minute setting automatically.
2 Turn the M.C. dial
to adjust the minute, then press to confirm.
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
DAB ANT PW Supply power to a DAB antenna. Select this when using the
optional
DAB antenna (AN-DAB1, sold separately) with the unit.
[ON]
[OFF] No power is supplied to a DAB antenna. Select this when using a
passive antenna with no booster.
SPEAKER MODE Switch between two operation modes: the 2-way network mode
(
NETWO
RK) and the standard mode (STANDARD) according to
the connections you have established. For details on operation
modes, see page 14.
After selecting the appropriate mode, turn the M.
C. dial t
o
select [YES], then press to confirm.
• Y
ou cannot complete the setup menu without setting the
[SPEAK
ER MODE].
• Once the speaker mode is set, this setting cannot be changed
unle
ss the default settings of this product are restored. Restore
the default settings to change the speaker mode setting (refer
to SYSTEM RESET on page 6).
[STANDARD],
[NE
TWORK
]
When [DAB ANT PW] is set to [ON], [UPDATING LIST] appears in the display and the
service list will be updated.
These settings other than [SPEAKER MODE] can be made at any time from the SYSTEM settings
(page 17) and INITIAL settings (page 5).
1 Press the M.C. dial to display the main menu.
2 Turn the M.C. dial to select [SYSTEM], then press to confirm.
3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.
4 Turn the M.C. dial to select [YES], then press to confirm.
1 Press and hold SRC/OFF until the unit turns off.
2 Press and hold SRC/OFF to display the main menu.
3 Turn the M.C. dial to select [INITIAL], then press to confirm.
4 Turn the M.C. dial to select an option, then press to confirm.
The options vary depending on the unit.
Canceling the demonstration display (DEMO OFF)
INITIAL settings
Menu Item Description
FM STEP Select the FM tuning step from 100 kHz or 50 kHz.
[100], [50]
REAR-SP Select when there is a full-range speaker connected to the rear
speaker out
put leads.
[FUL]
[SW] Select when there is a subwoofer connected directly to the rear
speake
r output leads without any auxiliary amplifier.
SYSTEM UPDATE Select [SYSTEM INFO] to confirm the latest system information
on
the u
nit.
Select [S/W UPDATE] to update the unit to the latest software
and
initialize t
he unit settings. For details on the latest software
and updating, visit our website.
[SYSTEM INFO], [S/
W UPDATE]
To Next Page
Loading...
