Do you have a question about the Pioneer DEQ-P7650 and is the answer not in the manual?
Category | Car Audio Processor |
---|---|
Time Alignment | Yes |
Input Channels | 6 |
Output Channels | 6 |
Subwoofer Control | Yes |
Source Level Adjustment | Yes |
DAC | 24-bit |
EQ | 13-band graphic EQ |
Crossover | 3-way |
Information about the unit and its functions, including connection details.
Details on connecting the unit to a Pioneer audio master unit.
Details on connecting optical inputs to the unit and compatible devices.
Table showing connections between Pioneer head units and optical inputs.
Highlights Dolby Digital/DTS compatibility and licensing information.
Explains the purpose, importance, and recommended reading of the manual.
Important safety warnings and general precautions for using the unit.
Steps to reset the unit's microprocessor under specific conditions.
Overview of the head unit's controls, buttons, and their functions.
Lists the available Digital Signal Processor (DSP) settings and adjustments.
Guide on how to navigate and operate the detailed DSP menu.
How to use the SFC function to recreate live performance acoustics.
How to adjust the stereo image by selecting specific listening positions.
How to select fader/balance settings for an ideal listening environment.
How to adjust volume levels for each source to prevent sudden changes.
How to compress the difference between loud and soft sounds for clarity.
How to override audio settings to check their effectiveness.
How to play back multi-channel audio in 2 channels.
How to use Dolby Pro Logic II for surround sound from 2-channel sources.
How to adjust Music mode with Panorama, Dimension, and Center Width controls.
How to set speaker size (LRG, SML, OFF) and configuration.
How to adjust the subwoofer's phase to improve bass output.
How to select the frequency for subwoofer and speaker crossover.
How to readjust speaker output levels using a test tone.
Using a test tone for overall balance among speakers.
How to adjust the distance between speakers and listening position.
How to select the mode for time alignment (INITIAL, CUSTOM, AUTO TA, OFF).
How to adjust the distance between each speaker and the selected position.
How to turn the auto-equalizer on or off.
Explanation of automatic adjustment of time alignment and equalizer.
Precautions and conditions before running the auto TA and EQ function.
Step-by-step guide to performing the auto TA and EQ function.
How to adjust equalization to match car interior acoustic characteristics.
How to recall the seven stored equalizer curves.
How to adjust front, rear, and center equalizer curves separately.
How to minimize distortion caused by equalizer curve settings.
How to reset all audio functions except volume.
Common and audio/DSP related problems and their solutions.
Explains error messages during auto TA and EQ and how to resolve them.
Definitions of technical terms like Dolby Digital, DTS, Dynamic range control, etc.
Technical specifications of the unit's hardware and audio capabilities.