Need help?Do you have a question about the Pioneer DEQ-P8000 and is the answer not in the manual?
General| Model | DEQ-P8000 |
|---|---|
| Type | Digital Signal Processor |
| Channels | 8 |
| Input Voltage | 14.4V |
| Weight | 1.5 kg |
| Audio D/A Converter | 24-bit |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.005% |
| Crossover | 12/18/24 dB/octave |
| Equalizer | 31-band graphic equalizer |
| Outputs | RCA |
| Signal-to-Noise Ratio | > 100 dB |
| Inputs | RCA |
| Equalizer Bands | 31-band Graphic Equalizer |
Safety warnings and procedure for resetting the microprocessor.
Setting speaker size (SMALL/LARGE/OFF) and subwoofer phase for optimal sound.
Using a test tone to easily get overall speaker balance and adjust output levels.
Explanation of how time alignment adjusts distance between speakers and listening position.
Adjusting front, rear, center equalizer curves for CUSTOM1/CUSTOM2.
Step-by-step guide to perform auto TA and EQ measurement, including microphone placement.
Continues procedure for auto TA and EQ, including starting measurement, stopping, and error handling.
Lists common symptoms like power issues, no sound, and low volume with causes and actions.
Addresses audio-specific issues like speaker adjustment, time alignment, subwoofer, and Dolby Pro Logic II.
To Next Page
