23
Basic Operation
To Listen to Music
The following explains the initial of operations required before you can listen to music.
Note:
• Loading a disc in this product. (Refer to page 40.)
1. Select the desired source (e.g. tuner).
7 Head Unit
Each press of the SOURCE button selects the desired source in the following order:
Built-in CD player = Multi-CD player = DVD player = TV = Tuner
= DAB (Digital Audio Broadcasting) Tuner = External Unit 1 = External Unit 2
= AUX
7 Remote Control
Each press of the button selects the desired source in the following order:
CD button : Built-in CD player = Multi-CD player = DVD player = OFF
AUX button : External Unit 1 = External Unit 2 = AUX = OFF
TUNER button : TV = Tuner = DAB (Digital Audio Broadcasting) Tuner = OFF
Note:
• External Unit refers to a Pioneer product (such as one available in the future) that, although incom-
patible as a source, enables control of basic functions by this product. Two External Units can be
controlled by this product, although “External” is displayed whether you select External Unit 1 or
External Unit 2. When two External Units are connected, the allocation of them to External Unit 1
or External Unit 2 is automatically set by this product.
• In the following cases, the sound source will not change:
* When a product corresponding to each source is not connected to this product.
* No disc is set in this product.
* No magazine is set in the Multi-CD player.
* No magazine is set in the Multi-DVD player.
* No disc is set in the DVD player.
* AUX (external input) is set to OFF. (Refer to page 19.)
• When this product’s blue/white lead is connected to the car’s Auto-antenna relay control terminal,
the car’s Auto-antenna extends when this product’s source is switched ON. To retract the antenna,
switch the source OFF.
Each press changes the Source ...
To Next Page
Loading...
