Pioneer KURO PDK-TS36B - Preparing the Cables

8
En
Preparing the Cables
Use the enclosed cable binders to bind the cables.
Ìi
Be very careful not to apply force to the bases of the cables.
Using the cable binders
1
Insert the cable binder through the hole
on the top of the rotating platform of the
stand.
$BCMFCJOEFS
2
Gathering cables and placing them on the
cable binder.
3
Locking the cable binder.
❖
Removing a cable binder
The lock is released by pushing
the part indicated by the arrow
in the figure.
PDK-TS36B_AZR1279B.indb 8 2008/07/07 9:32:35