Pioneer MEP-7000 User Manual

USING THE UTILITY
65
En
English
TO PERFORM A FACTORY RESET
All unit settings can be restored to their factory default values by
using the UTILITY screen (P. 62). The settings on TIME/REMAIN,
A.CUE, and TEMPO range will also be restored to their factory
default values (REMAIN, OFF, 10%).
1 With the power turned OFF, hold the UTILITY button
depressed while setting power to ON.
The button must be depressed for five seconds or more.
2 Confirm message.
After the boot-up screen appears, a message will be displayed:
[The settings have been reset to factory defaults].
3 Turn power OFF and ON again.
MEMO
•Recorded playlists and cue and loop point data are not deleted
during a factory reset.
MEP-7000_KU_EN.book 65 ページ ２００９年２月１２日 木曜日 午後３時１５分

Pioneer MEP-7000 Specifications

General

Frequency range	4 - 20000 Hz
Channels quantity	- channels
Digital sound processing	- bit
Total Harmonic Distortion (THD)	0.006 %
Dimensions (WxDxH)	483 x 325 x 91 mm
Power consumption (typical)	33 W

Weight and Dimensions

Weight	6100 g