PDP-427XD
124
1234
1234
C
D
F
A
B
E
NNIFOR
ETMP ARUREET
METP1
METP2
:
:
:
NAF
04+.2
04+.2
(C )
(C ) 031(A/D)
WOL
AMTIO
A–V1 3 1010 –NTV HE–B7
1
5
10
15
16
15 10 15 20 25 30 35 40
• Display/Meaning
TEMP1 : The temperature of the sensor on the panel side is displayed by the centigrade.
TEMP2 : The temperature conversion display is done with 10bit the A/D input value of Main uCON 76 pin (AN0). It is displayed by
both the centigrade (C) and 8bit A/D value.
(Remark:When temperature (C) of the sensor becomes more than a specified temperature, the shutdown start of processing.)
FAN : The value of the Fan rotating state is displayed.
STOP : stopped, LOW: slow speed, HIGH: high speed.
A present temperature and the FAN rotation are displayed.
If either [|] key or [\] key is pressed, the display data is refreshed.
8.2.1.4 TEMPERATURE
8.2.1.5 HOUR METER
Note 1: The SYSTEM SERIAL displays only FHD. It corresponds by sticking the seal in G7 model.
Note 2: The PANEL-side's HOUR METER/P-COUNT acquires information from the PANEL-side.
NNIFOR
OHUR EMERT
NAPEL
S/ERIAL
PANE L
PC-OUN
SREIAL
T
COUN T
AMTIO
A–V1 3 1010 –NTV HE–
5001 1H 21M
500000
____ ___________
0
1
5
10
15
16
15 10 15 20 25 30 35 40
9TIMES
B7
Meaning Item Name Display Example Corresponding RS-232C Command
HOUR METER (PANEL) PANEL 00151H 21M QIP
POWER ON COUNTER P-COUNT 00000095 TIMES QIP
SYSTEM SERIAL SERIAL QIP
• Display/Meaning
To Next Page
Loading...
