11
?
Problem
Possible Cause
Solutions
Troubleshooting
No display of digital TV broadcasts or EPG.
Press the POWER button on the Media Receiver to switch power off, and
wait for one minute or more before switching power on again.
If that doesn't solve the problem, be sure to disconnect the unit from the power outlet before
contacting the store where the unit was purchased. If you do not know how to contact the store
or the store is not nearby, consult with PIONEER Electronics (USA) Inc. or PIONEER Electronics
of Canada, Inc. (Refer to P.12)
This problem may occur due to strong external
noise (power supply voltage fluctuations
caused by static electricity, lightning
etc.).
POWER Button
DIGITAL TV
To Next Page
Loading...
