Pioneer PDP-507XD - Enjoying a game console or watching camcorder images; Connecting a game console or camcorder

62
En
Enjoying through External Equipment
12
Switching the SCART output
Video and audio signals output from INPUT 2 and INPUT 3
sources are the same as those used for the current image
display. You can however change the setting so that DTV
signals are always output regardless of the current image
display.
1 Press HOME MENU.
2 Select “Setup” ( / then ENTER).
3 Select “SCART Output” ( / then ENTER).
4 Select a desired parameter ( / then ENTER).
5 Press HOME MENU to exit the menu.
NOTE
• The following operations are given higher priority over the
above setting:
• Presetting a DTV programme for recording
• Execution of WYSIWYR (page 60)
Enjoying a game console or watching
camcorder images
Connecting a game console or camcorder
Use the INPUT 5 terminals to connect a game console,
camcorder and other audiovisual equipment.
Displaying an image from the game console or
camcorder
To watch an image coming from the game console or
camcorder, press INPUT 5 on the remote control unit or press
INPUT on the Plasma Television to select INPUT 5.
NOTE
• The INPUT 5 terminals are checked for cable connections in
the order where; 1) S-Video, 2) Video.
• Connect external equipment to only terminals that are to be
actually used.
Item Description
Auto
(factory default)
Outputs video and audio signals coming from the
selected input source.
Fixed on DTV Always output DTV signals.
Auto
Fixed on DTV
SCART Output
Pl
asma
T
e
l
ev
i
s
i
on
(l
e
ft
s
id
e v
i
ew
)
S-Video cable
(commercially available)
Composite video cables
(commercially available)
Game console/Camcorder