Pioneer PE6000 Series - Page 54

Function Code Tables PE6000 User Manual
54
Function
Code
Parameter Name Setting Range Default Property
P4-33 AI curve selection
Unit's digit (AI1 curve selection)
321
☆
1: Curve 1 (2 points, see P4-13 to P4-16)
2: Curve 2 (2 points, see P4-18 to P4-21)
3: Curve 3 (2 points, see P4-23 to P4-26)
4: Curve 4 (4 points, see A6-00 to A6-07)
5: Curve 5 (4 points, see A6-08 to A6-15)
Ten's digit (AI2 curve selection)
Curve 1 to curve 5 (same as AI1)
Hundred's digit (AI3 curve selection)
Curve 1 to curve 5 (same as AI1)
P4-34
Setting for AI less
than minimum input
Unit's digit (Setting for AI1 less than
minimum input)
00
☆
0: Minimum value
1: 0.0%
Ten's digit (Setting for AI2 less than
minimum input)
0, 1 (same as AI1)
Hundred's digit (Setting for AI3 less than
minimum input)
0, 1 (same as AI1)
P4-35 DI1 delay time 0.0–3600.0s 0.0s
★
P4-36 DI2 delay time 0.0–3600.0s 0.0s
★
P4-37 DI3 delay time 0.0–3600.0s 0.0s
★
P4-38
DI valid mode
selection 1
0: High level valid
1: Low level valid
00000
★
Unit's digit (DI1 valid mode)
Ten's digit (DI2 valid mode)
Hundred's digit (DI3 valid mode)
Thousand’s digit (DI4 valid mode)
Ten thousand’s digit (DI4 valid mode)