Pioneer PE6000 Series - Process Control PID Function

Function Code Tables PE6000 User Manual
66
Function
Code
Parameter Name Setting Range Default Property
PA-01 PID digital setting 0.0%–100.0% 50.0%
☆
PA-02 PID feedback source
0: AI1
1: AI2
2: Keyboard potentiometer
3: AI1 – AI2
4: Pulse setting (DI5)
5: Communication setting
6: AI1 + AI2
7: MAX (|AI1|, |AI2|)
8: MIN (|AI1|, |AI2|)
0
☆
PA-03 PID action direction
0: Forward action
1: Reverse action
0
☆
PA-04
PID setting feedback
range
0–65535 1000
☆
PA-05 Proportional gain Kp1 0.0–100.0 20.0
☆
PA-06 Integral time Ti1 0.01–10.00s 2.00s
☆
PA-07 Differential time Td1 0.00–10.000 0.000s
☆
PA-08
Cut-off frequency of PID
reverse rotation
0.00 to maximum frequency 2.00Hz
☆
PA-09 PID deviation limit 0.0%–100.0% 0.0%
☆
PA-10 PID differential limit 0.00%–100.00% 0.10%
☆
PA-11 PID setting change time 0.00–650.00s 0.00s
☆
PA-12 PID feedback filter time 0.00–60.00s 0.00s
☆
PA-13 PID output filter time 0.00–60.00s 0.00s
☆
PA-14 Reserved - -
☆
PA-15 Proportional gain Kp2 0.0–100.0 20.0
☆
PA-16 Integral time Ti2 0.01–10.00s 2.00s
☆
PA-17 Differential time Td2 0.000–10.000s 0.000s
☆
PA-18
PID parameter
switchover condition
0: No switchover
1: Switchover via DI
2: Automatic switchover based on
deviation
0
☆
PA-19
PID parameter
switchover deviation 1
0.0% to PA-20 20.0%
☆
PA-20
PID parameter
switchover deviation 2
PA-19 to 100.0% 80.0%
☆
PA-21 PID initial value 0.0%–100.0% 0.0%
☆