Pioneer PE6000 Series - Page 76

Function Code Tables PE6000 User Manual
76
Function
Code
Parameter Name Min. Unit
Communication
Address
U0-18 Input pulse frequency (Hz) 0.01 kHz 7012H
U0-19 Feedback speed (0.1Hz) 0.1 Hz 7013H
U0-20 Remaining running time 0.1 Min 7014H
U0-21 AI1 voltage before correction 0.001 V 7015H
U0-22 AI2 voltage (V) before correction 0.001 V 7016H
U0-24 Linear speed 1 m/Min 7018H
U0-25 Accumulative power-on time 1 Min 7019H
U0-26 Accumulative running time 0.1 Min 701AH
U0-27 Pulse input frequency 1 Hz 701BH
U0-28 Communication setting value 0.01% 701CH
U0-30 Main frequency X 0.01 Hz 701EH
U0-31 Auxiliary frequency Y 0.01 Hz 701FH
U0-32 Viewing any register address value 1 7020H
U0-35 Target torque 0.1% 7023H
U0-37 Power factor angle 0.1° 7025H
U0-39 Target voltage upon V/F separation 1 V 7027H
U0-40 Output voltage upon V/F separation 1V 7028H
U0-41 DI state visual display 1 7029H
U0-42 DO state visual display 1 702AH
U0-43
DI function state visual display 1
(functions 01-40)
1 702BH
U0-44
DI function state visual display 2
(functions 41-80)
1 702CH
U0-45 Fault information 1 702DH
U0-59 Current set frequency 0.01% 703BH
U0-60 Current running frequency 0.01% 703CH
U0-61 AC drive running state 1 703DH
U0-62 Current fault code 1 703EH
U0-63
Sent value of point-point
communication
0.01% 703FH
U0-64
Received value of point-point
communication
0.01% 7040H
U0-65 Torque upper limit 0.1% 7041H