41
Connecting your equipment
03
Notes
! When any of the INTERNET RADIO, MEDIA SERVER, FAVORITES, iPod/USB or ADAPTER PORT inputs is
selected in the main zone, it is only possible to select the same input as in the main zone for the sub zone.
(Inputs other than the ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the sub zone.
! SC-LX88 only: Any of INTERNET RADIO, MEDIA SERVER, FAVORITES, iPod/USB or ADAPTER PORT and
USB-DAC cannot be selected for each sub zone at the same time.
! SC-LX88 only: When AirPlay or DMR, and USB-DAC are input, you cannot select for each sub zone at the same
time.
Basic MULTI-ZONE setup (ZONE 2)
1 Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
2 Connect a subwoofer to the SUBWOOFER ZONE 2 OUT jack on this receiver.
When a subwoofer is connected, we recommend setting HPF (High Pass Filter) at ZONE Setup to ON (page 109 ).
ZONE 2
SUBWOOFER
ZONE 2
OUT
ZONE 2
SUBWOOFER
ZONE 2
OUT
RL
AUDIO IN
LINE LEVEL
INPUT
Sub zone (ZONE 2) Main zone
21
MULTI-ZONE setup using speaker terminals (ZONE 2)
You must select 5.2 +ZONE 2+ZONE 3 or 5.2 +ZONE 2+HDZONE in Speaker system setting (page 103 ) to use
this setup.
% Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
(Single)
A
SURROUND BACK
RL
R
Sub zone (ZONE 2) Main zone
L
(Single)
A
SURROUND BACK
Secondary MULTI-ZONE setup (ZONE 3)
% Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
ZONE 3
OUT
ZONE 3
OUT
RL
AUDIO IN
Sub zone (ZONE 3) Main zone
To Next Page
Loading...
