Pioneer VSX-D603S User Manual

Operating
Instructions
AUDIO/VIDEO STEREO RECEIVER
VSX-D6035
(D PIONEER scovess srmmomceven VSX-D5055
display.
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how
to operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
In some countries or regions, the shape of the power plug and power
outlet may sometimes differ from that shown in the explanatory
drawings. However, the method of connecting and operating the unit
is the same.
Note to CATV system installer
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.
IMPORTANT
The lighting fiash with arrowhead, within an equilateral CAUTION:
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
DEMO MODE
©
The
demonstration
mode
is
activated
by
turning
on
the
power
switch
while
holding
down
the
RETURN
button
(from
power
standby
condition).
The
demonstration
will
appear
on
the
Press the POWER switch to cancel the demonstration.
® Activating the demonstration mode causes memory contents
to return to their original default condition except tuner.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR SACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
RETURN function
This
function
returns
the
unit
to
a
set
of
initial
settings
and
ready
to
broadcast
tuner.
This
is
helpful
during
troubleshooting
or
when
no
sound
is
output.
For
details,
refer
to
page
15.
WARNING:
to
prevENT
FIRE
OR
SHOCK
HAZARD,DO
NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.
IMPORTANT NOTICE
The
serial
number
for
this
equipment
is
located
on
the
rear
panel.
Please
write
this
serial
number
on
your
enclosed
warranty
cardaind
keep
it
in
a
secure
area.
This
is
for your
security.
The exclamation point within an equilateral triangle
intended to alert the user to the presence of importart
operating and maintenance (servicing) instructions n
the literature accompanying the appliance.
dW) PIONEER’
The Art of Entertainment

Pioneer VSX-D603S Specifications

General

Brand	Pioneer
Model	VSX-D603S
Category	Stereo Receiver
Language	English

Summary

Safety Instructions and Precautions

Safe Operation and Handling

Covers reading instructions, proper placement, ventilation, and avoiding water.

Electrical Safety and Unit Protection

Addresses power, cords, polarization, and preventing damage or fire hazards.

Initial Setup and Switch Adjustments

Voltage Selector Switches

Instructions for adjusting the voltage selector switches based on local power requirements.

Channel Step/FM De-Emphasis Switch

Guidance on setting the channel allocation and de-emphasis values for optimal reception.

Surround Sound Modes

DSP Surround Effects

Explains the 5 DSP modes (Jazz, Dance, Hall, Simulated, Pro Logic Theater) for enhanced audio.

Dolby Pro Logic Surround

Details the Dolby Pro Logic Surround mode for movies and music.

Center Mode Configuration

Center Channel Speaker Settings

Explains NORMAL, WIDE, and PHANTOM center modes for surround sound.

Speaker Placement and Installation

Optimizing Surround Sound Placement

Provides guidance on positioning front, center, and rear speakers for optimal surround effect.

Connecting Components

AM Antenna Setup

Instructions for setting up the AM loop antenna for optimal reception.

Connecting Audio Systems

Basic Audio Connections

Illustrates and explains the connections for a basic audio system setup.

Connecting Video Systems

Basic Video Connections

Details the connections required for a basic video system integration.

Speaker Connections

Connecting Speaker Cables

Step-by-step guide on how to connect speaker cords to the unit.

Advanced Connections and Applications

Connecting Additional Components

Shows how to connect extra audio and video components, including a graphic equalizer.

Multi-Room Audio Setup

Connecting for Multi-Room Playback

Explains how to set up and connect components for multi-room audio distribution.

Rear Panel Connections and Features

Antenna and Audio/Video Jacks

Describes FM/AM antenna terminals, tape monitor jacks, phono inputs, and video outputs.

VCR, Multi-Room, and Other Jacks

Details VCR jacks, multi-room remote input, and other rear panel interfaces.

Rear Panel Interface Details

Control and Speaker Terminals

Explains control jacks, center/rear/front speaker terminals, and pre-out jacks.

Input/Output Jacks for Components

Covers CD, Video, TV/SAT, LD inputs, and AC outlets for power.

Front Panel Controls and Indicators

Power and Control Buttons

Details the power switch, memory buttons, reset button, and input selector buttons.

Front Panel Indicators and Sensors

Explains the remote sensor, standby indicator, and other front panel displays.

Front Panel Operations

Audio and Source Selection Controls

Covers controls for direct listening, tuning, bass/treble, balance, muting, and volume.

Mode and Speaker Selection

Details buttons for surround modes, Dolby 3CH Logic, speaker selection, and tuning modes.

Display Section Indicators

Tuning and Signal Indicators

Explains indicators for tuning, FM stereo, mono, and station call.

Mode and Status Indicators

Details indicators for speakers, Dolby Pro Logic, DSP modes, center modes, and tape monitoring.

Tuner Operations

FM/AM Reception Modes

Explains FM auto stereo and monaural reception modes and their selection.

Tuning and Presetting Stations

Covers manual tuning, auto tuning, preset tuning, and station memory functions.

Receiving FM Simulcast TV

Simulcast TV Program Reception

Guide to receiving FM simulcast TV programs for stereo audio with TV viewing.

Operating Audio/Video Components

Playback Procedures

Steps for selecting and playing back audio and video sources using input selectors.

Cassette Deck Recording

Recording and Copying Tapes

Instructions for recording to Tape 1, Tape 2, copying tapes, and tape monitoring.

Video Recording Procedures

Recording Video Sources

Details on how to perform video recording using VCRs.

Surround Sound Adjustments

Adjusting Surround Levels and Effects

Guides on setting surround levels, effect levels, and delay times for immersive audio.

Video Signal Selector Function

Selecting Video and Audio Sources

Explains how to use the video signal selector for listening to sound with different video images.

Auto Source Control

Memorizing and Recalling Settings

Instructions for memorizing receiver settings and recalling them with Auto Source Control.

Improving Reception Quality

Antenna Setup and Grounding

Provides tips for external FM antennas, AM antennas, and proper grounding techniques.

Remote Control Basics

Battery Installation and Range

Details on inserting batteries, understanding remote range, and replacement.

Remote Control Functions

Receiver Control Buttons

Explains the receiver power, muting, and volume controls operated by the remote.

Tuner and TV Operations

Details how to use the remote for tuner functions (tuning, presets) and TV operations.

Advanced Remote Controls

Surround and Audio Adjustments

Covers remote buttons for center/rear levels, effect level, surround modes, and test tone.

Source Selection and Special Functions

Details remote buttons for input selection, direct mode, V.SEL, sleep timer, and auto source control.

Remote Control for External Components

Controlling LD, CD, Tape, and VCR

Explains how to use the remote to operate LD players, CD players, cassette decks, and VCRs.

Remote Control Learning Function

Learning Commands from Other Remotes

Guides on using the learning function to control other manufacturers' components.

Learning Remote Commands

Step-by-Step Learning Process

Provides a detailed procedure for learning remote control commands from other devices.

Troubleshooting Guide

Power, Sound, and Picture Issues

Solutions for problems like no power, no sound, no picture, and high noise levels.

Control, Tuning, and Video Issues

Addresses remote control problems, auto-tuning errors, and video source display issues.

Audio Output and Copying Problems

Solutions for lack of rear sound and issues with video tape copying.

Technical Specifications

Audio, Video, and Tuner Performance

Comprehensive technical details on amplifier, video, FM/AM tuner performance, and miscellaneous features.

External Surface Maintenance

Cleaning and Care Instructions

Guidance on how to clean and maintain the unit's external surfaces without damage.