Need help?Do you have a question about the PITH & STEM DropTop Classic and is the answer not in the manual?
Connect the tilt monitor mount to the back of your monitor using provided screws.
Place monitor into DropTop, loosely screw bolts, adjust height, then tighten.
Use wall plate to mark and drill 8mm holes for fixings.
Attach wall plate using screws from Fitting Pack #9.
Safely hang and align the DropTop onto the wall plate.
Drill 25mm holes for Geefix and 8mm holes for wall plugs.
Thread pullcord, feed plate, align, and tighten screws for GeeFix system.
General| Category | Indoor Furnishing |
|---|---|
| Brand | PITH & STEM |
| Model | DropTop Classic |
| Material | Wood |
| Color | Natural |
| Style | Modern |
| Usage | Office |
To Next Page
