THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model___________ Serial No._____________ Purchase Date_____________
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating
and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the
invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place
for future reference.
Technical Specifications
Tool Name: Compact Bender
Item Number: 31980
Dimensions: 10-1/8” W x 39-3/4”H x 35-3/4”L
Stand: .325” Steel
Mounting Holes: (4) ½”
Max. Width of Stock: 1-15/16”
Max. Stock Thickness: 5/16”
Max. Bar Stock Diameter: 5/8”
Dies: 1”, 1-1/4”, 1-1/2”, 1-3/4”, 2”, 2-1/2”, 3”
Tool Weight: 44 LBS.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should
always be followed to reduce the risk of personal injury and
damage to equipment.
Read all instructions before using this product!
1. Avoid working alone. If an accident happens, an assistant can bring help.
2. Keep work area clean. Cluttered areas invite injuries.
3. Observe work area conditions. Keep work area well lighted.
4. Keep children away. Children must never be allowed in the work area. Do not let them handle
machines, tools, or extension cords.
5. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock
up tools and keep out of reach of children.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective,
electrically nonconductive clothes and nonskid footwear are recommended when working. Wear
restrictive hair covering to contain long hair.
7. Use eye and ear protection. Always wear ANSI approved impact safety goggles.
8. Do not overreach. Keep proper footing and balance at all times.
#31980 Page 2
To Next Page
Loading...