Caution! Before using the camera for the first time, please fully charge the
battery of the mini camera! Do not charge directly from the mains but by USB from
laptop/pc or powerbank! (max. 5V/3A)
This mini video camera has a built-in lithium-ion battery. You can charge it in one of the
following ways:
1. Connect the mini video camera to the USB port of your PC or laptop. (Stop recording
first before connecting the camera).
2. Connect the mini camera to a portable (max) 5V/3A charger. In this case, you can
continue to use the mini camera in the charging process. During the charging process,
the red led will flash. (Charging will take approx. 10 to 30 minutes depending on the
voltage)
After the mini-camera battery is fully charged, the red led will light up constantly. Then
charge the cam again for about 30 minutes and the battery is 100% charged.
The camera may become warm during charging. Do not worry about this, it is
normal. The cameras have all been extensively tested.
To Next Page
Loading...