~ 117 ~
If the selected programme cannot be combined with the desired functions, these
functions cannot be selected or will be cancelled and the indicators switches off
automatically.
5.3.3 Steam function
FUNCTION « STEAM » = 1 ADDITIONAL STEAM CYCLE
❖ An additional steam cycle can be set for some washing programmes.
❖ The steam cycle reduces creasing of the textiles. In addition, the textiles are
refreshed by the steam.
➢ To add an additional steam cycle to a washing programme, press the « STEAM » -
BUTTON once briefly.
The « STEAM » - FUNCTION may not be available for all programmes.
If the selected programme cannot be combined with the desired functions, these
functions cannot be selected or will be cancelled and the indicators switches off
automatically.
5.3.4 Delayed programme startl
FUNCTION « DELAYED PROGRAMME START »
❖ You can set a delayed programme start (washing and drying programmes).
❖ Set the washing / drying programme and the desired additional functions and
then activate the delayed programme start using the corresponding button.
You can choose a delay period from 1 hours to 24 hours.
The delay period must be longer than the duration of the washing / drying
programme as the set delay time defines the end of the washing / drying
programme. Example: if the duration of the set washing / drying programme is
02:58 h, the delay period must be set between 03:00 hours and 24:00 hours. The
programme duration is integrated in the delay period.
HOW TO ACTIVATE THE DELAYED PROGRAMME START
1. Put the laundry to be washed in the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the water tap.
To Next Page
Loading...