Need help?Do you have a question about the Pkolino Casita Floor Bed - Twin and is the answer not in the manual?
General| Product Name | Pkolino Casita Floor Bed - Twin |
|---|---|
| Category | Indoor Furnishing |
| Bed Size | Twin |
| Material | Wood |
| Type | Floor Bed |
| Assembly Required | Yes |
Emphasizes adult assembly, proper material disposal, and warnings against unsafe use.
Informs about potential exposure to wood dust and associated health risks.
Advises against strangulation hazards, horseplay, jumping, and hanging from the bed structure.
Lists all parts included in the box for the Casita Floor Bed twin.
Specifies the necessary tools for assembly, including a Phillips screwdriver and hammer.
Illustrates and describes all hardware components with their sizes and quantities.
Provides contact information and procedure for obtaining missing parts or hardware.
Insert 12 wooden dowels (A) into the headboard components.
Attach parts 2 and 3 to part 1 using 3 bolts (B) and Allen wrench (H).
Attach part 4 to parts 2 and 3 using 3 bolts (B) and Allen wrench (H).
Attach parts 2 and 3 to part 7 using 3 bolts (B) and Allen wrench (H).
Attach part 8 to parts 2 and 3 using 3 bolts (B) and Allen wrench (H).
Insert 10 wooden dowels (A) into the rail components.
Attach part 5 to headboard part 1 with 1 bolt (D), do not tighten yet.
Attach part 7 to part 5 with 1 bolt (D), do not tighten yet.
Attach part 6 to headboard/footboard with 2 bolts (D), do not tighten.
Attach part 6 again with 2 bolts (D) and tighten all bolts on the bed.
Attach part 5 to the headboard and footboard with 2 bolts (D), adjusting frame.
Attach part 12 to part 13 with 1 bolt (C) and Allen wrench (H).
Attach parts 12 and 13 to parts 1 and 4 using 2 bolts (C).
Attach part 12 to part 14 with 1 bolt (C) and Allen wrench (H).
Attach parts 12 and 14 to parts 7 and 8 using 2 bolts (C).
Attach part 15 to the footboard and headboard with 2 bolts (D).
Insert dowels (A) and attach metal plate (G) with screws (F) to part 9.
Attach parts 9 and 11 with bolts (D), and metal plate with screws (F).
Reinforce guard rails by attaching parts 10 with 6 screws (E).
Details conditions and procedures for returning purchased products.
Outlines the 30-day warranty against defects in material and workmanship.
Specifies what the warranty does not cover and limits on damages.
Provides contact information for customer service inquiries and support.
Regular checks for stability and how to disassemble the furniture.
Safe methods for cleaning the furniture without damage, avoiding harsh chemicals.
Explains natural wood variations, grain, knots, and finish as normal.
To Next Page