Need help?Do you have a question about the Planet Audio PL1200.2 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| RMS Power @ 2 Ohms | 300W x 2 |
| Max Power @ 2 Ohms | 600W x 2 |
| Bridged RMS Power @ 4 Ohms | 600W x 1 |
| Minimum Impedance Unbridged | 2 Ohms |
| Minimum Impedance Bridged | 4 Ohms |
| RCA Inputs | Yes |
| Speaker Level Inputs | Yes |
| Fuse Rating | 30A |
| Input Sensitivity | 200 mV - 6V |
| Frequency Response | 20 Hz to 20 kHz |
| Crossover | Variable |
| Bass Boost | 0-18dB |
| Power Output (RMS) / Power Output | 1200W |
Lists all items included in the amplifier package for user verification upon receipt.
Details the amplifier's capability to operate efficiently at 2 Ohm loads and its implications.
Provides step-by-step instructions for securely mounting the amplifier unit in a vehicle.
Advises against misusing the input level control as a volume control to prevent distortion.
Illustrates speaker and power connections for 2-channel amplifiers in standard and bridged configurations.
Shows power and speaker wiring for 4-channel amplifiers in four-channel and bridged modes.
Details power and speaker connections for monoblock amplifiers operating in monoblock mode.
To Next Page
