PLANET ECLIPSE CS3 - Page 48

ELECTRONICS
US ER INT E RFA CE PARA METE RS
C S 3
48
FIG .3
FACTORY PARAMETER
Restores all of the marker parameters back to
their factory state. This will also force a search
for, and configuration of, any new hardware.
> NO : do not perform a reset.
> RESTORE : restore all parameters to
their factory default value. 1
1 CAUTION: This will erase all saved settings.
FIG .2
AUTO OFF PARAMETER
The amount of time that the marker can be
idle before it switches itself off.
> RANGE : 00:00 - 60:00 minutes in
increments of 04:00. A value of 00:00
disables auto power off.
FIG .1
DBL CLICK PARAMETER
Sets where the Select button double-click can
be used.
> NONE : Double-click disabled.
> POWER UP : Double-click to power up.
> ALL : Double-click to power up and
access the setup menu.