12
Step 3: Adjust the stand angle.
1 PC
RJ-45 connector, to maintain the existing network structure,
connected directly to the PC through straight CAT-5 cable
2 LAN
RJ-45 connector, for Internet access, connected directly to
Switch/Hub through straight CAT-5 cable.
The LAN interface also can be connected with 802.3af PoE
switch or converter for power supply (VIP-254PT only)
3 5V DC
5V DC Power input outlet
4 Handset
RJ-11 connector, connected directly to the Handset.
ÍNote
1. For VIP-254PT, either PoE or AC adapter can be deployed
at one time
Power Adapter (5V DC)
NOTE: Use only the power adapter shipped with the
unit to ensure correct functionality.
Press and hole the button of right side to change the
stand mount angle.
To Next Page
Loading...